Licensed Aircraft Engineer - Base Maintenance
4,7 (73)
Experiencia mínima: Más de 5 años
Contrato indefinido, jornada completa
Executive
- Publicada Hace 1d
- Publicada de nuevo
Requisitos
- Estudios mínimos
Licenciatura
- Experiencia mínima
Más de 5 años
- Requisitos mínimos
Qualification To be considered for the role you must meet the below requirements:
Licensed Aircraft Engineer TE.03
-Degree/Honors (12+3) in Aeronautical, Mechanical, Avionics, Electronic, or Technical Engineering, or a Maintenance Engineering Licence.
-Minimum 10 years of Engineering experience, with 5+ years as certifying staff.
-Minimum of 2 aircraft type approvals with at least one of the Emirates aircraft types (A380, A350, or B777).
-Preferred GCAA, UK CAA or EASA license eligible for conversion.
-Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.Licensed Aircraft Engineer TE.02
-Degree/Honors (12+3) in Aeronautical, Mechanical, Avionics, Electronic, or Technical Engineering, or a Maintenance Engineering Licence.
-Minimum 8 years of Engineering experience, with 2+ years as certifying staff.
-Minimum of 2 aircraft type approvals with at least one of the Emirates aircraft types (A380, A350, or B777).
-Preferred GCAA, UK CAA or EASA license eligible for conversion.
-Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.Details of Safety Sensitive role
-Safety Sensitive Role: Yes
-PSMP Role: Yes
Descripción
In this role you will:
-Carry out aircraft maintenance and servicing tasks in compliance with manufacturer and safety procedures. Ensure that assigned zones/aircraft are maintained as per latest revisions of approved authority Technical Publications such as Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc. Ensure that personal approvals/licences are valid and applicable to aircraft types.
-Ensure all off-aircraft tasks i.e. spares handling, robberies, hold items etc. are handled in compliance with company procedures and that the associated paperwork is complete to ensure full transparency. Determine if tooling/equipment used is serviceable and appropriate for the task and use specialised tooling where required. Ensure that trouble shooting procedures/tools used for fault rectification are carried out in a cost effective and efficient manner.
-Carry out component changes as necessary as part of trouble shooting process and/or as directed by immediate supervisor. These should be done in accordance with AMM, IPC or other manufacturer/vendor documentation to complete the task.
-Ensure that all activities performed are carried out in accordance with all safety rules and regulations and in adherence to company procedures, highlighting an deficiencies/requirements (whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained.
-Maintain effective communication with Colleagues including Managers and Senior Engineers to ensure a seamless flow of information and to highlight any potential operational issues. Ensure that relevant reports are related to service delays, incidents and accidents are completed in detail including the identification of issues that led to the event so that rectification can be sought through short term maintenance planning.
-Manage the performance of staff using performance review process and system. Ensure SMART goal setting, interim/annual reviews and development plans are in place for assigned staff members in accordance with company procedures.
-Attend training/recurrent modules as required to enhance skills and comply with CAR 145.
-Carry out aircraft maintenance and servicing tasks in compliance with manufacturer and safety procedures. Ensure that assigned zones/aircraft are maintained as per latest revisions of approved authority Technical Publications such as Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc. Ensure that personal approvals/licences are valid and applicable to aircraft types.
-Ensure all off-aircraft tasks i.e. spares handling, robberies, hold items etc. are handled in compliance with company procedures and that the associated paperwork is complete to ensure full transparency. Determine if tooling/equipment used is serviceable and appropriate for the task and use specialised tooling where required. Ensure that trouble shooting procedures/tools used for fault rectification are carried out in a cost effective and efficient manner.
-Carry out component changes as necessary as part of trouble shooting process and/or as directed by immediate supervisor. These should be done in accordance with AMM, IPC or other manufacturer/vendor documentation to complete the task.
-Ensure that all activities performed are carried out in accordance with all safety rules and regulations and in adherence to company procedures, highlighting an deficiencies/requirements (whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained.
-Maintain effective communication with Colleagues including Managers and Senior Engineers to ensure a seamless flow of information and to highlight any potential operational issues. Ensure that relevant reports are related to service delays, incidents and accidents are completed in detail including the identification of issues that led to the event so that rectification can be sought through short term maintenance planning.
-Manage the performance of staff using performance review process and system. Ensure SMART goal setting, interim/annual reviews and development plans are in place for assigned staff members in accordance with company procedures.
-Attend training/recurrent modules as required to enhance skills and comply with CAR 145.
- Referencia
271655
- Categoría
- Nivel
Mando intermedio
- Vacantes
1
- Salario
6.000€ - 8.000€ Bruto/mes
No disponemos de información del número de inscritos. Este proceso se gestiona desde la web de la empresa (fuera de InfoJobs).
Los datos bancarios, de pago y datos personales (DNI, foto) nunca deben proporcionarse al solicitar un empleo. Consulta nuestros consejos para una búsqueda de empleo segura.
Ofertas similares
Licensed Aircraft Engineer - Base Maintenance
Emirates Airlines- Dubai
- Hace 1d
In this role you will: -Carry out aircraft maintenance and servicing tasks in compliance with manufacturer and safety procedures. Ensure that assigned zones/aircraft are maintained as per latest revisions of approved authority Technical Publications such as Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc. Ensure that personal approvals/licences a [...]